LFC Series All-Polyester High-Flow Pleated Filter Cartridge

The LFC Series All-Polyester High-Flow Pleated Filter Cartridge is designed for industrial liquid filtration applications. Its all-polyester construction and pleated filter structure provide an expanded filtration area within a practical cartridge design. It is suitable for water treatment, process filtration, wastewater pretreatment, seawater desalination, and other industrial filtration systems.

chia sẻ：

Liên hệ với chúng tôi

Yêu cầu trực tuyến

Thư：trade@yhenv.com

Whatsapp：8618353281502

Giới thiệu chi tiết

LFC all-polyester high-flow pleated Filter Cartridges use deep-layer fine polyester fiber membranes as filter media, which have good temperature resistance.

Its pressure resistance allows it to withstand continuous operation at 120℃ for one week and nearly two weeks at 90℃. Filter element diameter.

A single 7"/180mm filter cartridge has a maximum filtration area exceeding 8m². Flow rate can reach 60m³/h. It features a polyester outer frame and a single opening.

The filter is specially designed with an inside-out liquid flow pattern to ensure that all pollutant particles are trapped inside the filter element, making it widely applicable.

Widely used in various fields. It reduces the requirements for filter size and the number of filter cartridges during use, significantly saving costs.

Reduced equipment and labor costs, and easier operation.

Design parameters

Specifications (diameter * length)	Design flow rate (m³/h)	Maximum flow rate (m³/h)	Filter area (m2)
7"*20"	15	40	3.5
7"*40"	30	80	6.5
7"*60"	45	110	8.5

Structural materials

model	LFC
Filter media	PBT
Support/Guide	PBT
End cap	PBT
outer protective sleeve	PBT

Interface type

LFC	40	PBT	0050	F	S
LFC	length	Material	accuracy	sealing ring	Interface
	20=20"	PBT	0010 = 1μm	F+ Fluororubber	S+ Frame
	40=40"	PBT	0050 = 3μm
	60=60"		0050 = 5μm
			0100 = 10μm
			0150 = 15μm
			0250 = 25μm
			0400 = 40μm
			0700 = 70μm

Working characteristics

Maximum operating temperature	120℃
Maximum working pressure difference	0.38 MPa @ 20℃
It is recommended to replace the differential pressure.	0.15Mpa@20℃

Typical application scenarios

Chemical condensate

Power plant heating network drainage

hydrogen peroxide workshop

High-temperature liquid filtration

Precision filtration of liquids containing aromatic hydrocarbon solvents such as benzene and toluene.